I have a BEKO WME7267W. When I turn on, select a programme and press start, it does not fill with any water at all, hence I cannot do any washing. How do I fix this please?
After several seconds the leds will flash. Let go of the start button and the error code will come up E??
If its E04 is an overfill error code.
Turn off he washer.
What you need to do now is pull the washer out and remove the top.
On the right hand side is the pressure switch.
Take this off and under it is a thin hose.
Pull this off and blow hard down it.
This will clear the pressure chamber out.
Then retry the washer and see what happens.
If still the same then its possibly the pressure switch is the problem and will need to be replace. Then see how it goes from there.
You may need to ring the Beko helpline , but they are one of the crappiest brands on the market Rob , the one i would always go for is Bosch, but i know they are not within everyones budget,good luck.
Information posted by users should be considered for general guidance only. Users act, or refrain from action, on the basis of such information entirely at their own risk.
fixed4free.com does not endorse any of the information supplied on this website by users.