My beko WM6143B washing machine won't start. The spin cycle works straight away when empty and after 5 minutes with a small amount of clothes in. When I try to put it on any other cycle the drum fills up level with the door and nothing else happens. The drum doesn't budge. After I cancel the wash and turn the machine on and of it drains and that is all I'm getting. Spin, drain but no wash. I've checked the belt and is fine. The door locks ok. The plumbing is ok. And there is contact to the motor from the carbon brushes. I'm thinking the problem could be electrical and just won't activate a wash cycle. P.s the spin cycle and drain cycle don't work straight away I need to fiddle about with it turning it of and on and holding the start/pause/cancel button for 3 seconds.
Try this Michael , it works on most models with this problem ,sorry if it does not fix yours but its worth a go...
Turn power button off (not at wall)
Select 90 degree wash
Press Start and Cancel button down at same time for 3 seconds and turn power button on whilst still holding buttons down - Start light will flash.
Leave power on.
Select any Spin position.
Press Start and Cancel button at same time again for 3 seconds - other buttons may start to flash - if they do, press Start and Cancel button together again for 3 seconds.
Machine should be re-set ready for use.
Information posted by users should be considered for general guidance only. Users act, or refrain from action, on the basis of such information entirely at their own risk.
fixed4free.com does not endorse any of the information supplied on this website by users.