my key fob recently stopped working my car alarm , so changed the battery , the same again ! found out how to tune the fob into the ignition . four turns of the ignition wait for a bleep then press any key and wait for a bleep , which happened GREAT ( not) still didn't work . i now have to open the car with the key then put the key in the ignition and turn it on to deactivate the alarm , is there anything else i can look for ?
Insert the ignition key and turn from position II (Ignition) to position 0 (All off) and back four times within three seconds.
Remove the ignition key. The locking control system is now in "learn mode" for the next 20 seconds and the red warning system LED (By the clock) stays on continuously to indicate this.
During the 20 seconds press one of the transmitter buttons. The remotes signal and code number is learned by the locking module and is indicated by flashing the warning system LED.
Wait until learn mode times out (20 seconds) or switch the ignition back to ON.
Information posted by users should be considered for general guidance only. Users act, or refrain from action, on the basis of such information entirely at their own risk.
fixed4free.com does not endorse any of the information supplied on this website by users.