That was based on a 98 hyundai accent. To release it on a 2002+ accent its much easier, just put in 4 large nails into the slots, and push this releases the stereo on it just slides out (based on my current car)
I did this on my old car and it was a NIGHTMARE. If i remember right you undid the two screws behind the as tray. This released the main part of the dash(Make sure
you pull off the heater knobs first...l they just pull off. After doing this i had to unclip the heater controls from behind the dash. This released the main dash part. once behind there, just remove the 4 screws holding the stereo in. Putting it back together is he hard part. its just the reverse, but to get the heater controls back on is really fiddly. I got cut knuckels and fingers doing this
Information posted by users should be considered for general guidance only. Users act, or refrain from action, on the basis of such information entirely at their own risk.
fixed4free.com does not endorse any of the information supplied on this website by users.