Mend Whirlpool Tumble Dryers

Mend Household Appliances, Tumble Dryers

Find out how to mend it for free.

Ask Question

Mend repair fix Whirlpool tumble dryers

Related Categories

Mend > Tumble Dryers

Our Whirlpool AWZ 121 start button will not lock on?

We have this tumble dryer and the start button will get the drum rotating but will not stay switched on. As you let go of the button the machine stops. Any ideas welcomed.

Paul
July 2005

Whirlpool Household Appliances, Tumble Dryers Start Button Dryer Drum

We also took John's advice and bypassed the switch by joining together the two wires with white connectors. Worked a treat and saved about £200 and a load of unnecessary waste!
Thanks

Tony
November 2021

I have a whirlpool cabrio and the lock button won't stay locked so the cycle can begin or end how can I bypass that

linda
April 2015

Hi guys a few years down the line now from the original conversation but I am trying to bridge the on off switch, but I seem to have to bridge the two with white cons AND the green cons?this seems to work but towards the end of cycle makes a very loud buzz for a few minutes then buzzing stops and it carries on until done... Why is this? Would it still be ok as it usually does a very small buzz as the timer changes over anyway?

Jason
January 2014

fitting a new control switch

allan clews
March 2011

Instead of cutting and crimping the two brown wires together, and because I may have wanted to install a new switch if the non-use of the old switch became too frustrating, I used one of the brown wires from the rhs control panel to bypass the switch. Worked a treat.

CoolCat
February 2011

Took John's advice and crimped together the two brown wires (from the white plugs).

End result: working dryer and a very happy wife!

Martin LB
November 2010

This is possibly a door latch problem.
Fluff build up in the mechanism or have you broken off the plastic pin at the top of the door that operates the mechanism?

Graeme Murphy.
September 2009

Replace the switch

whycantijustdoasiwanto@supanet.com
December 2007

Remove top cover and pull out the two WHITE connectors with the BROWN wires from the switch on the start button.Cut off these white connectors and then crimp/solder the two brown wires together.This will give the same effect as jamming the switch in

John
October 2006

Ours is the same. We jam it so that it is permanently 'on' , so that when you select the time on the dial it begins 'automatically' and only stops when the time comes to an end or the door is opened.

M
June 2006

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for Start Button Dryer Drum

Mend repair fix Whirlpool tumble dryers

where is the thermal fuse on a whirlpool awz 7913 6th sense?

Whirlpool AWZ 220 Heater element or thermostats faulty?

Whirlpool Vented Dryer AWZ 3519 Thermal Fuse location?

Whirlpool heavy duty 10kg 3RAWZ480E MQ0?

where is the thermal fuse on a whirlpool awz 7913 6th sense?

How can I fix my whirlpool awz 7913 dryer?

How do I get my tumble dryer operating again?

i opened the top of the machine there was belt there that was snapped?

whirlpool awd7913 dryer DEAD?

Whirlpool only blows out cold air?

Whirlpool AWZ 7913 not heating up?

How can I mend my whirlpool tumble dryer?

How to mend ...

howtomendit.com for free repair help, information and advice.

Mend tumble dryers ...

Mend Tumble Dryers

Mend repair fix Whirlpool tumble dryers

Mend Whirlpool Tumble Dryers

Related Categories

Mend > Tumble Dryers

Our Whirlpool AWZ 121 start button will not lock on?

Automatic Answer

Our Whirlpool AWZ 121 start button will not lock on?

I can answer this question ...

Our Whirlpool AWZ 121 start button will not lock on?

How to mend ...

Mend tumble dryers ...

What is wrong with the spin?

Miele T260 is cutting out (with an alarm) and not heating up?

White knight tumble dryer c44aw?

IDV75 tumble dryer?

John lewis condenser dryer dlt0 five?