Mend Zanussi Washing Machines

Mend Household Appliances, Washing Machines

Find out how to mend it for free.

Ask Question

Click here to mend Zanussi washing machines

Related Categories

Mend > Washing Machines

Zanussi FJ963 programme selector rotates non-stop?

Hi, I now have a Zanussi FJ963 with it's first ever problem ...

The (mechanical) programme selector progresses without stopping taking about 5 minutes to complete ALL options before repeating.

During this, water is admitted and pumped out at appropriate positions, but the drum does not rotate at all. I can rotate the drum by hand (it's not jammed) and I can see the belt is intact and routed correctly.

The fault appeared without any previous signs ... anyone recognise this, or know of a fix for it?

Thanks.

Sar
October 2005

Zanussi Household Appliances, Washing Machines Zanussi Problem Stopping

Thanks for all the fantastic advice guys. This site rocks!
With your help I've now had to buy a replacement.

Thanks a lot!

Sar
November 2005

OK, here's a follow-up.
I checked the drum motor brushes - both fine.
Checked the water level switch and pressure switch - both fine.
Checked the control PCB (on the sidewall, near the base) and found a charred 110ohm/5W wirewound resistor. I replaced it with a new one (thanks Maplin), and re-assembled, but it burnt out in the first couple of seconds of when the drum would have started to agitate (without the drum moving even a twitch).

So, it looks like the burnt resistor is a symptom, not a cause. I'd like to think the problem is somewhere else on the control PCB but it'd be hard to diagnose (microprocessor onboard) and if I simply replace it and the fault is elsewhere it could be a costly experiment ...

Any ideas anyone?
Thanks

Sar
October 2005