Stylus Photo R300 says parts in your printer have come to end of Service li?

take it to a computor shop and ask to have it rechiped

francis flood
August 2007

turn the power off. than press and hold stop-utility-power buttons same time to reset to factory settings,

grach
December 2006

hold down the stop and maintance button,while holding them down turn off the printer keep the buttons pressed down for 10 seconds turn the printer on then release the buttons, the printer will reset itself to original factory settings, once it has done this turn off the printer then turn it on again it will print as before

tom watson
October 2006

As Peter has said, but try downloading a program called SSC Service Utility to reset your waste ink counters could be the problem.

Michael
January 2006

Just had this message in an RX630. Epson service centre says its a print counter that will block printing eventually. Costs about AUD $90 to get it fixed although there are guides for DYI at your own risk.

The sponges under the print mechanism needs changing at the end of this counter for some reason and has something to do with the print run distance and cleaning of the heads.
Sorry i can't give more info.

Peter Christian
December 2005

Could be toner. On Laser-jets they have a toner capacity that expires causing service life info. Check to see if toner is re-placeable.

Terry T. @ tagproductions@sbcglobal.net
November 2005