How can I fix my Triton T81i shower?

ive just had this problem ,check inlet valve isnt blocked, if not check the resistance measurement on the solienoid valve with multimeter the two contacts at the bottom should read 3.85, if its 000 it needs replacing cost about £10.00 from triton. its just as easy to take shower off the wall to do it 20min work, check to see if you need a stabilizing valve aswell .its sits above solienoid valve, this might be leaking, you will only no if you remove the front cover then turn it on.

kazcmot
February 2006

Visit showerdoc.co.uk for spares. Looks like the water inlet valve is not letting water in (Item 4). Either that or the stabaliser valve is faulty / blocked.(item 3). I have a problem with my mothers T80i. It wont turn on the heating elements because it thinks the water pressure is too low - that is a faulty stabaliser valve, the diaphram will not rise up, so it shows a red flag in the little window and disables the micro switches which turn on the heating elements. Hope this helps.

ROb 8-)

Kintara
February 2006