After about three cycles the base of the dishwasher is full of water and trips off a micro switch to prevent further ingress; this then trips the house MCB! I tip the machine backwards and empty out the water and all is ok until about three more loads, well you get the idea,so please HELP!
Indesit D610, three years old
It may be that the tubes that lead to the water level sensors are clogged. Find them in the bottom of the dishwasher, take apart and clean.
Hot washes will help to keep them clear if you manage it.
John J Gray
June 2004
First check that the machine is level it has adjustable feet on the base. Check that the bottom spray arm mounting on the floor of the machine is screwed tight on the base. If all of these are OK then its probally a leaking Washpump.
E Lambert
May 2004
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
