I was screwed around by a service guy and they comdemed the machine. I found it only needed a .53 gasket at the thermistat to stop a leak. But they threw away the Diverter valve so I got a new one. I see there is an arrow on the plastic. Looks like flow directions. I just need to know what hoses connect to which 3 ends of the diverter valve. There is a black hose from the top, one from the bottom and a white ended hose that goes out of the machine. Also does it matter which way the black and orange wite connect to each tab on the valve?
If you take off the control panel face, held on by two screws on the back of the machine, you should find a small manual inside which will tell you how.
Mike
February 2008
I have a gwl10. that is not spinning dry and clothes in the very bottom are wet. I tried to get in fault mode but not sure how. power on I hold the spin up/down button but nothing happens.
howtomendit.com for free repair help, information and advice.
