|
|
|
|
|
|
|
|
|
|
how to re-start potterton lynx 2 combi boiler?normally there is a red light by the restart button or the pilot light but this time i've got nothing. elec supply had failed but is now back. any ideas as to what i need to do to re=light the boiler?
many thanks,
any January 2008
|
|
|
Click here if you can answer this question |
|
|
|
|
|
Hi i forgot to mention the boiler is electrionically ignition, so no need to relight manually, the boiler will relight itself once you have reset the boiler, follow the instructions to what i have said and let me know how you go......
Jonno January 2008 |
|
|
|
|
|
|
|
|
Hi, If your boiler has a red light on the front,near the hot water dial, this is indicating you need to reset the boiler, how to do this
Underneath the boiler bottom left, you will find a switch, push this in fopr 10 seconds, this will reset the boiler and hey presto
once you have done this, then run the heating by selecting constant on the switch at the front of the boiler, just to check, leave this to run for 5 mins, if it does not cut out then the boiler has been reset
Hope this helps, let me know how you go!!!!!!!!
Jonno January 2008 |
|
|
|
|
|
|
|
|
Add your answer using the form below ...
|
|
|
|
|
|
|
|
|
|
|