|
|
|
|
|
|
|
|
|
|
Vokera Mynute 28SE - won't ignite?Numerous faults on this boiler, but had most major parts replaced, i.e. heat exchanger, APS.
Problem now is heating and hot water won't ignite unless inner cover is slackened off. Pressure sitting at 1.5 - rises to around 3, and it leaks some water at this stage from the overflow and then sits at around 1.5. Also it fires up every couple of minutes, and radiators get very hot but eventually settle down to the required temp. Can you help?
Linda June 2008
|
|
|
Click here if you can answer this question |
|
|
|
|
|
if you are in sussex try sussex gas on 01273 583052 they are the vokera agents , better to get someone who knows what they are doing
mark June 2008 |
|
|
|
|
|
|
|
|
Thanks for that - will get someone to have a look at it.
Linda June 2008 |
|
|
|
|
|
|
|
|
lots of things going on here, and sounds like a lot of messing has been going on with this boiler too.....
lets get this straight, FIRING THE BOILER WITH INNER COVER 'SLACKENED OFF' IS DANGEROUS, THESE BOILERS CAN, WILL, AND DO KILL PEOPLE, ALWAYS USE A TRAINED PROFESSIONAL DO NOT MESS!!
T June 2008 |
|
|
|
|
|
|
|
|
Add your answer using the form below ...
|
|
|
|
|
|
|
|
|
|
|