my miralec supreme 8.3 e.showrer stops water flow. i have reset the switch inside by pressing it in ,this works for about 5 minutes with every thing working fine but then the unit shuts down and ejects some very hot water......any ideas how to fix this
Hi, Tony, sounds like a water flow problem, unit overheating because of low flow. There is a filter on the inlet water connection - you have to remove the unit from the wall (as far as I remember) and unscrew the inlet pipe connection to reach and clean the filter.
I have had my unit for about 22 years and over that period the only faults have been with the microswitches (they appear to be "off" but in fact are still letting a small current pass) You can remove the microswitches (3 of them) easily (ISOLATE THE ELECTRICITY SUPPLY FIRST!!!) and either blow them out with switch cleaner, or renew them (best option) They are very cheap, standard microswitches available from Maplins or other suppliers.
Hope this has been of some help to you.
Cheers - Kevin.
Information posted by users should be considered for general guidance only. Users act, or refrain from action, on the basis of such information entirely at their own risk.
fixed4free.com does not endorse any of the information supplied on this website by users.