This is the front switch which rotates to set the programme, and pulls out/pushes in to switch on/off.
When pulling it to switch on, the switch broke in my hand, and the cap of it came away, revealing a broken plastic part beneath. That part had a little projection which looked as if it should click into a corresponding small hole in the cap.
However, I could not fit it back, because the plastic part beneath had broken. My efforts only resulted in the loose broken part falling down inside a little way.
Can I get a replacement for the broken part, and is it practical to replace it myself?
Information posted by users should be considered for general guidance only. Users act, or refrain from action, on the basis of such information entirely at their own risk.
fixed4free.com does not endorse any of the information supplied on this website by users.