|
|
|
|
|
|
|
|
|
|
White Knight Sensordry, Cleaned now won't work?My Son pointed out that the dryer was not drying things as quickly as it used to. I decided to give it a good clean out, I noticed that the cavity below the door was full of fluff, so I thought that I would be able to get it out by going through the back, I took the two back panels off, and unclipped the tube, and got as much fluff out of the tube and where the tube clipped onto as possible, I then put it all back together and used a vacuum to clean the fluff from the cavity below the door, which was also full of loose change! I then thought that maybe this would be easier if I took of the front panel, so undid all the screws around the door, but could not get the panel off, so did them all back up again, apart from the top two as they would not screw in again, obviously had washers or suchlike on the back. Plugged back in, turned dial and it is clicking when you go past 0 but is not turning or doing anything else, please help!!
Sara November 2012
|
|
|
Click here if you can answer this question |
|
|
|
|
|
No answers have been added yet. (Answers will appear here.) |
|
|
|
|
|
|
|
|
Add your answer using the form below ...
|
|
|
|
|
|
|
|
|
|
|