My Bosch washer Nexxt Premium WFMC640SUC/02 do not work properly. sometime it works well, sometime it does not. It did not agitate and spin. when I check the error codes, the code er 20 and dr9 and dr18 are displayed on the screen. What are my washer's problems? thank for your time and your help.
Either the spin cycle ended because of a severely unbalanced load or communication was lost between the motor control module and the main control module. If the load was unbalanced, manually
balance the load and remove some items to reduce the size of the load. If the washer still won't spin, unplug the washer and reconnect any loose wires on the control module and the motor control module. Replace the wire harness if damaged. If the wire harness connections are okay, replace the motor control module. If the problem persists, replace the control module.
Possible parts
Wire harness, Control module, Motor control module.
Cannot find any referance to fault codes fr09 or dr 18, or in fact any dr codes !!
Information posted by users should be considered for general guidance only. Users act, or refrain from action, on the basis of such information entirely at their own risk.
fixed4free.com does not endorse any of the information supplied on this website by users.