|
|
|
|
|
|
|
|
|
|
|
hOW DO I REASSEMBLE MY BISSELL PROHEAT CARPET CLEANER?i TOOK APART MY BISSELL PROHEAT 1699 CARPET CLEANER AND NOW I DO NOT KNOW HOW TO REASSEMBLE IT. WHEN I SAY I TOOK IT APART, I MEAN I TOOK IT COMPLETELY APART. I DON'T REMEMBER WHERE ALL THE PIECES GO. cAN SOMEONE HELP ME?
Brittany February 2007
|
|
|
Click here if you can answer this question |
|
|
|
|
|
Here is a link to Proheat 2x 9200 Bissell service guide. I finally found a link that worked! Shows full assembly and very helpful trouble shooting.
http://lib.store.yahoo.net/lib/vacuumcleanerbacgs/bissell-proheat-2x-repair-guide.pdf
Jen April 2012 |
|
|
|
|
|
|
|
|
I used the link provided, I could easily rad the link was Bissell.com.au it showed me everything I needed to see. Thanks for posting this information.... http://www.bissell.com.au/images/IncludeContent/Service_Center_Help/Upright_Deep_Cleaner_Repair_Guide.pdf
I'llFixIt December 2011 |
|
|
|
|
|
|
|
|
you are all stupid the links shown has nothing to do with the bissell 8920. screw off
Kissmyanthia April 2011 |
|
|
|
|
|
|
|
|
Thanks John!!!
This Aussie Bissell repair web address is just what we all need! I have looked at hundreds of 'how to' sites just to fix the base sprayer. Thank you from America, Your the best!!!
This Repair guide answer from JW helped fix my 8920 and I have used it to fix my neighbors new 9400-5.
From here in Arizona... it is kind of amazing, we are in the age Isaiah spoke of, the Knowledge age. Yet trying to get a simple PDF is like trying to find the lost Dutchman gold mine. Maybe some millon dollar Bissell exec will read this and post the Manuals. Thanks again John, JCW.
Rohn Barton April 2011 |
|
|
|
|
|
|
|
|
I cannot help you with the tubing, but I can help with the rest- I completely disassembled mine (Most but not all tubes) and put it back together properly- there are 6 screws on the cover, 4 screws on the pump 4 screws on the motor housing, 2 screws for the magic bottle receptor 2 screws to completely remove the brush, 2 belts- I didn't disassemble the handle but will tonight to check something.
the red plates are reinstalled on the base of the unit to secure the brush guards. the belts are accessed through the access port on top of case and on the bottom of the unit- take the red plate off that is on the belt side of the brush to replace/reset your belts. the c
screws are all the same except for the motor housing screws. if you study everything you should be able to intelligently reassemble your unit
Scott December 2010 |
|
|
|
|
|
|
|
|
where does the red clips go on the top of the railing or on the bottom
walter August 2009 |
|
|
|
|
|
|
|
|
I'm not sure about the plumbing on the Bissell ProHeat Model 8930.C someone tell me how to get a diagram or a picture?...
Donna August 2008 |
|
|
|
|
|
|
|
|
the best thing to do is study the appliance (if still sold)
at a local store and try to determine where the case screws go.
Take the parts and and lay them out on your lounge carpet, and take a slow approach in studying. There are not that many parts in the machine. Don't panic. Just take your time looking at it. The answer will come ... its a lot easier than a jigsaw to put back together.
Garry K June 2007 |
|
|
|
|
|
|
|
|
All 3 are the same and all work.
JCW April 2007 |
|
|
|
|
|
|
|
|
Here is the Bissell repair manual
http://www.bissell.com.au/images/IncludeContent/Service_Center_Help/Upright_Deep_Cleaner_Repair_Guide.pdf
John April 2007 |
|
|
|
|
|
|
|
|
try this link has the repair manual.
www.bissell.com.au/images/IncludeContent/Service_Center_Help/Upright_Deep_Cleaner_Repair_Guide.pdf
john March 2007 |
|
|
|
|
|
|
|
|
http://www.bissell.com.au/images/IncludeContent/Service_Center_Help/Upright_Deep_Cleaner_Repair_Guide.pdf
mj March 2007 |
|
|
|
|
|
|
|
|
Add your answer using the form below ...
|
|
|
|
|
|
|
|
|
|
|
|
|
|